Instruction Manual

Watlow EZ-ZONE
®
RMC Module • 122 • Chapter 4 Setup Page
RMC Module • Setup Page
Dis-
play
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Probus
Index
Parameter
ID
Data
Type
& Read/
Write
[`Si;E]
[ Si.E]
Profile
Source Instance E
Set the instance of the
function selected above.
1 to 250 1 5398 0x7A
(122)
1
0x3C (60)
- - - - 22060 uint
RWE
[`s2;E]
[ SZ.E]
Profile
Source Zone E
Set the zone of the func-
tion selected above.
0 to 16 0 5406 0x7A
(122)
1
0x40 (64)
- - - - 22064 uint
RWE
[SFn;F]
[SFn.F]
Profile
Source Function F
Set the type of function
that will be used for
this source. Source will
be used in profile step
type "Wait for Process
or Event" as "Wait For
Process 2"
[nonE] None (61)
[``Ai] Analog Input (142)
[CUrr] Current (22)
[`C;Pr] Cool Power, Control
Loop (161)
[`h;Pr] Heat Power, Control
Loop (160)
[PWr] Power, Control Loop (73)
[`Lnr] Linearization (238)
[MAt] Math (240)
[``Pu] Process Value (241)
[`SP;C] Set Point Closed, Con-
trol Loop (242)
[`SP;o] Set Point Open, Control
Loop (243)
[`uAr] Variable (245)
None 5392 0x7A
(122)
1
0x39 (57)
- - - - 22057 uint
RWE
[`Si;F]
[ Si.F]
Profile
Source Instance F
Set the instance of the
function selected above.
1 to 250 1 5400 0x7A
(122)
1
0x3D (61)
- - - - 22061 uint
RWE
[`S2;F]
[ SZ.F]
Profile
Source Zone F
Set the zone of the func-
tion selected above.
0 to 16 0 5408 0x7A
(122)
1
0x41 (65)
- - - - 22065 uint
RWE
[SFn;G]
[SFn.g]
Profile
Source Function G
Set the type of function
that will be used for
this source. Source will
be used in profile step
type "Wait for Process
or Event" as "Wait For
Process 3"
[nonE] None (61)
[``Ai] Analog Input (142)
[CUrr] Current (22)
[`C;Pr] Cool Power, Control
Loop (161)
[`h;Pr] Heat Power, Control
Loop (160)
[PWr] Power, Control Loop (73)
[`Lnr] Linearization (238)
[MAt] Math (240)
[``Pu] Process Value (241)
[`SP;C] Set Point Closed, Con-
trol Loop (242)
[`SP;o] Set Point Open, Control
Loop (243)
[`uAr] Variable (245)
None 5394 0x7A
(122)
1
0x3A (58)
- - - - 22058 uint
RWE
Note:
Some values will be rounded off to fit in the four-character display.
Full values can be read with other interfaces.
Note:
If there is only one instance of a menu, no submenus will appear.
** These parameters/prompts are available in these menus with firmware revisions 6.0 and
above.
R: Read
W: Write
E: EEPROM
S: User Set