User guide

Watlow EZ-ZONE
®
PM PID Controller • 64 • Chapter 6 Setup Page
Setup Page
Dis-
play
Parameter Name
Description
Range Default
Modbus Rela-
tive
Address
CIP
Class
Instance
Attribute
hex (dec)
Pro-
fibus
Index
Param-
eter ID
Data
Type
&
Read/
Write
[A;dSP]
[A.dSP]
Alarm (1 to 4)
Display
Display an alarm message
when an alarm is active.
[`oFF] Off (62)
[``on] On (63)
On Instance 1
Map 1 Map 2
1510 1910
Offset to next
instance (Map
1 equals +50,
for Map 2
equals +60)
0x6D (109)
1 to 4
0x10 (16)
30 9016 uint
RWES
[`A;dL]
[ A.dL]
Alarm (1 to 4)
Delay
Set the span of time that
the alarm will be delayed
after the process value ex-
ceeds the alarm set point.
0 to 9,999 seconds 0 Instance 1
Map 1 Map 2
1520 1920
Offset to next
instance (Map
1 equals +50,
for Map 2
equals +60)
0x6D (109)
1 to 4
0x15 (21)
31 9021 uint
RWES
[`FUn]
[`Set]
Function Key Menu
`leu]
[ LEv]
Function Key (1 to 2)
Active Level
The Function Key will
always power up in the
low state.
Pressing the Function Key
will toggle the selected
action.
high] High (37)
[Low] Low (53)
High Instance 1
Map 1 Map 2
1360 1600
Instance 2
Map 1 Map 2
1380 1620
0x6E (110)
1 to 2
1
137 10001 uint
RWES
Note:
Some values will be rounded off to fit in the four-character display. Full values can be
read with other interfaces.
R: Read
W: Write
E: EE-
PROM
S: User
Set