User`s manual

WATLOW Series 982 User’s Manual 4.41
Setup Menus, Chapter 4
Setup-Comm
Interface Type
Select the interface type for Output 4, option S.
• [`485] selects EIA/TIA-485.
• [`422] selects EIA/TIA-422.
[IntF] This prompt appears only on controllers equipped with communi-
cations hardware for EIA/TIA-485 and EIA/TIA-422 (98__-____-_S__).
Default
↓
[`485] [`422]
[IntF] [IntF]
Interface Type
Select the interface type for Output 4, option U.
• [`485] selects EIA/TIA-485.
• [`232] selects EIA/TIA-232.
[IntF] This prompt appears only on controllers equipped with communi-
cations hardware for EIA/TIA-485 and EIA/TIA-232 (98__-____-_U__).
Default
↓
[`232] [`485]
[IntF] [IntF]
[IntF]
[IntF]