User`s manual

Watlow Series SD ■ 54 ■ Chapter 9 Factory
Display Parameter Name
Description
Settings Range
(Integer values for Modbus
in parentheses.)
Default Modbus*
(less 40,001
offset)
Read/Write
Appears if:
Factory Page
9
To go to the Factory Page, press both the Up ¿ and Down ¯ keys for six seconds from the Home Page. {Fact} will
appear in the upper display and {page} in the lower display.
• Press the ‰ Advance Key to move through the parameter prompts.
• Press the Up ¿ or Down ¯ keys to change the parameter value.
• Press the Infinity Key ˆ at any time to return to the Home Page.
[AMb]
[AMb]
Ambient Temperature
Displays the current calculated ambient
temperature.
-50.0 to 300.0°F NA
277 R
278 R
Always active.
[A;mn]
[A.Mn]
Minimum Recorded Ambient
Temperature
Displays the minimum recorded ambient
temperature.
-50.0 to 300.0°F NA NA Always active.
[A;ma]
[A.MA]
Maximum Recorded Ambient
Temperature
Displays the maximum recorded ambient
temperature.
-50.0 to 300.0°F NA NA Always active.
[DSPL]
[dSPL]
Display Intensity
Increase or decrease the brightness of the
upper and lower display.
15 to 100% duty 100
NA
Always active.
[rESt]
[rESt]
Restore Factory Calibration
Replaces the user calibration parameters
with the factory calibration parameters.
[~~no] (0)
[~yES] (1)
[~~no] (0)
208 R/W
Always active.
[Usr;r]
[Usr.r]
Restore User Settings
Restores customer configured settings.
Two sets of user settings for non-profiling
version and one set of user settings for
profiling version.
[~~no] (0)
[Set1] (1)
[Set2] (2)
[~~no] (0)
[~yES] (1)
[~~no] (0)
[~~no] (0)
209 R/W
Non-profiling version
only.
(SD_ C - _ _ _ _ - _ _ _ _ )
Profiling version only.
(SD_ R - _ _ _ _ - _ _ _ _ )
[USr;S]
[USr.S]
Save User Settings
Saves customer configured settings. Two
sets of user settings for non-profiling ver-
sion and one set of user settings for profil-
ing version.
[~~no] (0)
[Set1] (1)
[Set2] (2)
~~no] (0)
[~yES] (1)
[~~no] (0)
[~~no] (0)
210 R/W
Non-profiling version
only.
(SD_ C - _ _ _ _ - _ _ _ _ )
Profiling version only.
(SD_ R - _ _ _ _ - _ _ _ _ )
[PrF;;r]
[Usr.r]
Restore User Profiles
Restores the current customer config-
ured profiles
[~~no] (0)
[~yES] (1)
[~~no] (0)
209 R/W
Profiling version only.
(SD_ R - _ _ _ _ - _ _ _ _ )
[PrF;;S]
[USr.S]
Save User Profiles
Saves the current customer configured
profiles.
[~~no] (0)
[~yES] (1)
[~~no] (0)
210 R/W
Profiling version only.
(SD_ R - _ _ _ _ - _ _ _ _ )
[dFLt]
[dFLt]
Default Parameters
Reset all parameters to the default values
(may take up to 4 seconds to complete).
[~~no] (0)
[~yES] (1)
[~~no] (0)
207 R/W
Always active.