User`s manual

Wa tlow EZ-ZONE
®
ST • 29 • Chapter 2 Install and Wire
Data Types Used with CIP
uint = Unsigned 16 bit integer
int = Signed 16-bit
dint = Signed 32-bits, long
real = Float, IEEE 754 32-bit
string = ASCII, 8 bits per character
sint = Signed 8 bits , byte
To learn more about the DeviceNet and EtherNet/IP
protocol point your browser to http://www.odva.org.
Profibus DP
To accommodate for Profibus DP addressing the fol-
lowing menus contain a column identified as Profibus
Index. Data types used in conjunction with Profibus
DP can be found in the table below. For more infor-
mation pertaining to the use of this protocol with the
ST control download the RUI/Gateway User Manual
by pointing your browser to:
http://www.watlow.com/literature/pti_search.cfm?dltype=5
Once there move to the bottom of the page and enter
EZ-ZONE into the Keyword field and then click the
search button.
Data Types Used with Profibus DP
Word = Unsigned 16 bit
INT = Signed 16-bit Integer
dint = Signed 32-bit Integer
REAL = Float, IEEE 754 32-bit
CHAR = ASCII, 8 bits per character
BYTE = 8 bits
To learn more about the Profibus DP protocol point
your browser to http://www.profibus.org