User`s manual

21
22
23
24
Specifi cations
Line Voltage/Power
• All voltage levels represent minimums and
maximums
• 85 to 264V~(ac), 47 to 63Hz
• 20 to 28VÅ(ac), +10/-15 percent; 50/60Hz, ±5
percent
• 12 to 40VÎ(dc)
• 10VA maximum power consumption
• Data retention upon power failure via nonvola-
tile memory
• Compliant with SEMI F47-0200, Figure R1-1
voltage sag requirements @ 24VÅ(ac) or
higher
Environment
• -18 to 65°C (0 to 149°F) operating temperature
• -40 to 85°C (-40 to 185°F) storage temperature
• 0 to 90 percent RH, non-condensing
Accuracy
• Calibration accuracy and sensor conformity:
±0.1 percent
of span, ±1°C @ the calibrated ambient
temperature and rated line voltage
• Type S, 0.2 percent
• Type T, below -50°C; 0.2 percent
• Calibration ambient temperature @ 25°C ±3°C
(77°F ±5°F)
• Accuracy span: 540°C (1000°F) minimum
• Temperature stability: ±0.1°C/°C (±0.1°F/°F)
rise in ambient maximum
Agency Approvals
• UL
®
/EN 61010 Listed
• ANSI/ISA 12.12.01-2007 Class 1 Division 2
Groups A, B, C, D, Temperature Code T4A.
• UL® 50, NEMA 4X, EN 60529 IP66
• CSA C22.2 No. 24 File 158031
• RoHS, W.E.E.E.
• SEMI F47-0200
Controller
• User selectable heat/cool, on-off, P, PI, PD, PID
or alarm action
• Auto-tune control algorithm
• Control sampling rates: input = 10Hz, outputs =
10Hz
• Input and output capacity per controller type
ordering information
Serial Communications
• Isolated communications
• Standard Bus Confi guration Protocol
Wiring Termination—Touch-Safe Terminals
• Input, power and controller output terminals
are touch safe removable 12 to 22 AWG
Use 75°C, Cu conductor only•
Universal Input
• Thermocouple, grounded or ungrounded sen-
sors
• >20MΩinput impedance
• Maximum of 2KΩ source resistance
• RTD 2- or 3-wire, platinum, 100Ω @ 0°C
calibration to DIN curve (0.00385 Ω/Ω/°C)
• Process, 4-20mA @ 100Ω, or 0-10VÎ(dc) @
20kΩ input impedance; scalable
Functional Operating Range
Type J: -210 to 1200°C (-346 to 2192°F)•
Type K: -200 to 1370°C (-328 to 2500°F)•
Type N: -200 to 1300°C (-328 to 2372°F)•
Type S: -50 to 1767°C (-58 to 3214°F)•
Type T: -200 to 400°C (-328 to 750°F)•
RTD (DIN): -200 to 800°C (-328 to 1472°F)•
Process: -1999 to 9999 units•
Output Hardware
• Switched dc, 22 to 32VÎ(dc) with a maximum
of 40 mA supply current available.
• Open collector, maximum sink current 100 mA,
@ 30VÎ(dc)
• Solid state relay (SSR), Form A, 0.5A @
24VÅ(ac) minimum, 264VÅ(ac) maximum,
opto-isolated, without contact suppression
• Electromechanical relay, Form C, 5A, 24 to
240VÅ(ac) or 30VÎ(dc) maximum, resistive
load, 100,000 cycles at rated load
• Electromechanical relay, Form A, 5A, 24 to
240VÅ(ac) or 30VÎ(dc) maximum, resistive
load, 100,000 cycles at rated load
• NO-ARC relay, Form A, 15A, 24 to 240VÅ(ac),
no VÎ(dc), resistive load, 2 million cycles at
rated load
• Universal process:
- 0 to 10VÎ(dc) into a minimum 1,000Ω load
- 4 to 20mA into maximum 800Ω load
Operator Interface
• Dual 4 digit, 7 segment LED displays
• Typical display update rate 1Hz
• Advance, infi nity, up and down keys plus an
EZ-KEY key (not available in 1⁄32 DIN)
EZ-KEY automatically programmed as an Auto/•
Manual transfer mode function.
How to Reach Us
Corporate Headquarters
Watlow Electric Manufacturing Company
12001 Lackland Road
St. Louis, MO 63146
Sales: 1-800-WATLOW2
Manufacturing Support: 1-800-4WATLOW
Email: [e-mail]
Website: www.watlow.com
From outside the USA and Canada:
Tel: [phone]
Fax: [phone]
Latin America
Watlow de México S.A. de C.V.
Av. Fundición No. 5
Col. Parques Industriales
Querétaro, Qro. CP-76130
Mexico
Tel: [phone]
Fax: [phone]
Europe
Watlow France SARL
Immeuble Somag
16, Rue Ampère
95307 Cergy-Pontoise CEDEX
France
Tel: + 33 (0)1 30 73 24 25
Fax: + 33 (0)1 30 73 28 75
Email: [e-mail]
Website: www.watlow.fr
Watlow GmbH
Postfach 11 65, Lauchwasenstr. 1
D-76709 Kronau
Germany
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.watlow.de
Watlow Italy S.r.l.
Viale Italia 52/54
20094 Corsico MI
Italy
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.watlow.it
Watlow Ibérica, S.L.U.
C/Marte 12, Posterior, Local 9
E-28850 Torrejón de Ardoz
Madrid - Spain
T. [phone]
F. [phone]
Email: [e-mail]
Website: www.watlow.es
Watlow
Storgatan 24
302 43 Halmstad
Sweden
Tel: + 46 (0)35 27 11 66
Fax: [phone]
Email: [e-mail]
Website: www.watlow.se
Watlow UK Ltd.
Linby Industrial Estate
Linby, Nottingham, NG15 8AA
United Kingdom
Telephone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.watlow.co.uk
From outside The United Kingdom:
Tel: [phone]
Fax: [phone]
Asia and Pacific
Watlow Singapore Pte Ltd.
16 Ayer Rajah Crescent,
#06-03/04,
Singapore 139965
Tel: [phone] Fax: [phone]
Email: [e-mail] Website:www.watlow.com.sg
Watlow Australia Pty., Ltd.
4/57 Sharps Road
Tullamarine, VIC 3043
Australia
Tel: [phone]
Fax: [phone]
Website: www.watlow.com
Watlow Electric Manufacturing (Shanghai) Company
1118 Fangyuan Road, Anting Industrial Park, Jiading, Shanghai, PRC
201203
People’s Republic of China
Tel: [phone] Fax: [phone]
Email: [e-mail] Website: www.watlow.cn
ዌእዊዙዘንዀኮዐ㪹㆞↩䯍
ᇽ㨀℻掌◒ⅲ䞿◉␔䯭䞿
⥪⦌ኰወ⒴殷椝
Tel: [phone] Fax: [phone]
Email: [e-mail] Website: www.watlow.co.jp
Watlow Japan Ltd.
1-14-4 Uchikanda, Chiyoda-Ku
Tokyo 101-0047
Japan
Tel: [phone] Fax: [phone]
Email: [e-mail]
Website: www.watlow.co.jp
Watlow Korea Co., Ltd.
#1406, E&C Dream Tower, 46, Yangpyeongdong-3ga
Yeongdeungpo-gu, Seoul 150-103
Republic of Korea
Tel: [phone] Fax: [phone]
Website: www.watlow.co.kr
Watlow Malaysia Sdn Bhd
No. 14-3 Jalan 2/114
Kuchai Business Centre
Jalan Kuchai Lama
58200 Kuala Lumpur
Malaysia
Tel: [phone] Fax: [phone]
䝵䔈爜榊㳮匰↌㦘棟⏻⚇
浧楓ゑⓜ摠●ₒ影ℛ恾壮㲢⃚₏
榊崀
 ⍂䦮
Watlow Electric Taiwan Corporation
10F-1 No.189 Chi-Shen 2nd Road Kaohsiung 80143
Taiwan
Tel: [phone] Fax: [phone]
Your Authorized Watlow Distributor
Ordering Part Number (Part number digits 1 through 14) PMXCXXX-AAAABXX
All Models include: *Universal Sensor Input, Standard Bus Confi guration Communications
*Dual line Red over Green 7 Segment displays
Package Size (Digit #3)
3 = 1/32 DIN
6 = 1/16 DIN
8 = 1/8 DIN vertical (future option)
9 = 1/8 DIN horizontal (future option)
4 = 1/4 DIN (future option)
Primary Function (Digit #4)
C = PID Controller w/ Universal Input
Power Supply (Digit #5)
1 = 100-240 VAC
3 = 12-28VAC/DC
Output 1 and 2 Hardware Options (Digits #6 and #7)
Output 1 Output 2
CA = Switched dc/open collector None
CH = Switched dc/open collector NO-ARC 15 Amp power control
CC = Switched dc/open collector Switched DC
CJ = Switched dc/open collector Mechanical relay 5A, Form A
CK = Switched dc/open collector SSR Form A, 0.5 Amp
EA = Mechanical Relay 5 Amp form C None
EH = Mechanical Relay 5 Amp form C NO-ARC 15 Amp power control
EC = Mechanical Relay 5 Amp form C Switched DC
EJ = Mechanical Relay 5 Amp form C Mechanical relay 5A, Form A
EK = Mechanical Relay 5 Amp form C SSR Form A, 0.5 Amp
FA = Universal Process None
FC = Universal Process Switched DC
FJ = Universal Process Mechanical relay 5A, Form A
FK = Universal Process SSR Form A, 0.5 Amp
AK = None SSR Form A, 0.5 Amp
KK = SSR Form A, 0.5 Amp SSR Form A, 0.5 Amp
Future Options (Digits #8 thru #11)
AAAA = None
Menu Type (Digits #12)
B = PM Express with English manual (Limit or PID)
Additional Options (Digits #13 and #14)
AA = Standard EZ-ZONE face plate
12 = Class 1, Div 2 (not available with Limit Controller or mechanical relay outputs)
Multilingual User Manuals (PID only) and associated Watlow part numbers:
- English 0600-0065-0000
- Chinese 0600-0065-0001
- Japanese 0600-0065-0002
- Korean 0600-0065-0003
- German 0600-0065-0004
- French 0600-0065-0005
- Italian 0600-0065-0006
- Spanish 0600-0065-0007
Declaration of Conformity
Series PM
Watlow Winona, Inc.
1241 Bundy Blvd.
Winona, MN 55987 USA
Declares that the following product:
Designation:
Series PM (Panel Mount)
Model Numbers: PM (3 or 6)(Any Letter or number) – (1, 2, 3 or 4)(A, C, E, F or K)
(A, C, H, J or K)(Any letter or number) – (Any letter or number)(A, C, E,
F or K)(A, D, J or K) (Any three letters or numbers)
Classification: Temperature control, Installation Category II, Pollution degree 2
Rated Voltage and Frequency: 100 to 240 V~ (ac 50/60 Hz) or 15 to 36 Vdc/ 24 Vac 50/60 Hz
Rated Power Consumption: 10 VA maximum
Meets the essential requirements of the following European Union Directives by using the relevant
standards show below to indicate compliance.
2004/108/EC Electromagnetic Compatibility Directive
EN 61326-1 2006 Electrical equipment for measurement, control and lab-
oratory use – EMC requirements (Industrial Immunity,
Class B Emissions).
EN 61000-4-2 1996 A1, A2, 2001 Electrostatic Discharge Immunity
EN 61000-4-3 2006 Radiated Field Immunity
EN 61000-4-4 2004 Electrical Fast-Transient / Burst Immunity
EN 61000-4-5 2006 Surge Immunity
EN 61000-4-6 1996 A1, 2, 3, 2005 Conducted Immunity
EN 61000-4-11 2004 Voltage Dips, Short Interruptions and Voltage Variations
Immunity
EN 61000-3-2 2006 Harmonic Current Emissions
IEC 61000-3-3
1
2005 Voltage Fluctuations and Flicker
1
For mechanical relay loads, cycle time may need to be extended up to 150 seconds to meet flicker
requirements depending on load switched and source impedance.
2006/95/EC Low-Voltage Directive
EN 61010-1 2001 Safety Requirements of electrical equipment for
measurement, control and laboratory use. Part 1: General
requirements
Raymond D. Feller III Winona, Minnesota, USA
Name of Authorized Representative Place of Issue
General Manager December 2008
Title of Authorized Representative Date of Issue
Signature of Authorized Representative