User`s manual

Watlow EZ-ZONE™ RUI/Gateway • 12 • Chapter 4 RUI Page
Display Parameter name
Description
Settings
Range Default Appears If
[`LoC]
Lockout Menu
* The positions of the Operations Page and Profiling Page in the ranges
below can be changed in the Lock Menu (Factory Page). See the exam-
ples at the end of this chapter.
[ rLoC]
[rLoC]
Read Lock
Set the read-only security clearance level. The user
can access the selected level and all lower levels.
If the Set Lock level is higher than the Read Lock,
the Read Lock level takes priority.
1 Home Page
2 Operations Page*
3 Profiling Page*
4 Setup Page & Diag-
nostics Menu
5 Lock, Calibration &
Custom menus
5 always
[SLoC]
[SLoC]
Set Lock
Set the read-write security clearance level. The us-
er can access the selected level and all lower levels.
If the Set Lock level is higher than the Read Lock,
the Read Lock level takes priority.
0 No changes allowed
1 Home Page
2 Operations Page*
3 Profiling Page*
4 Setup Page & Diag-
nostics Menu
5 Lock, Calibration &
Custom menus
5 always
[diAg]
Diagnostics Menu
[`S;id]
[ S.id]
Software ID
View the software ID.
0 to 2, 147,483,647 always
[`S;rL]
[ S.rL]
Software Release
View the software release number.
0 to 2, 147,483,647 always
[`S;Pr]
[ S.Pr]
Software Prototype
View the software minor version number.
0 to 2, 147,483,647 always
[S;bLd]
[ S.bLd]
Software Build
View the software build number.
0 to 2, 147,483,647 always
[``Sn]
[ Sn]
Serial Number
View the controller serial number.
0 to 2, 147,483,647 always
[dAtE]
[dAtE]
Date of Manufacture
View the controller manufacture date.
0 to 2, 147,483,647 always
[USr;r]
[USr.r]
User Restore Set
Restore the factory default RUI Page settings or
load a saved configuration.
[nonE] Don't change
settings
[FCty] Factory set-
tings
[SEt1] User Set 1
[SEt2] User Set 2
Don't
change
always
[USr;S]
[USr.S]
User Save Set
Save the RUI Page settings.
[nonE] Don't change
settings
[SEt1] User Set 1
[SEt2] User Set 2
Don't
change
always
[iP;AC]
[iP.AC]
Diagnostics Menu
IP Actual Address Mode
View the addressing mode of the gateway in slot B
of this RUI.
[dhCP] DHCP
[F;Add] Fixed Address
DHCP always
[iP;A1]
[iP.A1]
Diagnostics Menu
IP Actual Address Part 1
View or change the first part of the IP address of
the gateway in slot B of this RUI..
0 to 255 None always
[iP;A2]
[iP.A2]
Diagnostics Menu
IP Actual Address Part 2
View or change the second part of the IP address of
the gateway in slot B of this RUI..
0 to 255 None always
[iP;A3]
[iP.A3]
Diagnostics Menu
IP Actual Address Part 3
View or change the third part of this controller's IP
address.
0 to 255 None always