User`s guide

Chapter 3: Communicating by DeviceNet Series D8 User’s Guide
72 Watlow Anafaze Doc. 0600-3120-2000
NOTE! All successful explicit message responses
from a Set service will contain no data. the re-
sponse will be a two-byte message contain-
ing the requester’s node address and service
code (with R/R bit set).
PV Retransmit Object
The PV Retransmit Object provides read/write access to all
process variable retransmit parameters. Instance 0 of this ob-
ject contains the class attributes listed in Table 3.31. The four-
loop controller has four additional instances, and the eight-
loop controller has eight additional instances, each containing
the attributes listed in Table 3.32. Instance 1 corresponds to
loop 1, instance 2 corresponds to loop 2, and so on.
Table 3.30 PV Retransmit Class and Services
Table 3.31 PV Retransmit Class Attributes
(Instance 0)
104 (68 hex) Get/Set Alarm Hysteresis UINT See page 147.
105 (69 hex) Get/Set Alarm High Output USINT See page 144.
106 (6A hex) Get/Set Alarm Low Output USINT See page 146.
107 (6B hex) Get/Set High Deviation Output USINT See page 145.
108 (6C hex) Get/Set Low Deviation Output USINT See page 146.
109 (6D hex) Get/Set Alarm Delay UINT See page 147.
110 (6E hex) Get Alarm Status UINT See page 154.
111 (6F hex) Get/Set Alarm Enable UINT See page 153.
112 (70 hex) Get/Set Alarm Function UINT See page 154.
113 (71 hex) Get/Set Alarm Acknowledge UINT See page 153.
Class Code 68 hex
Class Services 0E hex Get Attribute Single
Instance Services
0E hex Get Attribute Single
10 hex Set Attribute Single
Attribute Access Name Type Description
1 (1 hex) Get Revision UINT Revision of this object
2 (2 hex) Get Max Instance UINT Maximum instances of this object (8)
3 (3 hex) Get
Number of
Instances
UINT Number of object instances
Attribute
Access Name Type Description