User`s guide

Series D8 User’s Guide Chapter 3: Communicating by DeviceNet
Doc. 0600-3120-2000 Watlow Anafaze 67
Input Object
The Input Object provides read/write access to all input pa-
rameters. Instance 0 of this object contains the class attributes
listed in Table 3.19. The four-loop controller has four addi-
tional instances, and the eight-loop controller has eight addi-
tional instances, each containing the attributes listed in
Table 3.20. Instance 1 corresponds to loop 1, instance 2 cor-
responds to loop 2, and so on.
Table 3.18 Input Class and Services
Table 3.19 Input Class Attributes (Instance 0)
12 (C hex) Get/Set
Watchdog
Timeout Action
USINT
Defines how to handle inactivity or watchdog
timeouts; Auto Delete (1), Deferred Delete (3)
13 (D hex) Get
Produced Con-
nection Path
Length
UINT
Number of bytes in the Produced Connection
Path Attribute
14 (E hex) Get
Produced Con-
nection Path
EPATH
Specifies the Application Object(s) whose
data is to be produced by this Connection
Object.
15 (F hex) Get
Consumed
Connection
Path Length
UINT
Number of bytes in the Consumed Connec-
tion Path Length
16 (10 hex) Get
Consumed
Connection
Path
EPATH
Specifies the Application Object(s) that are to
receive data consumed by this Connection
Object.
Class Code 64 hex
Class Services 0E hex Get Attribute Single
Instance Services
0E hex Get Attribute Single
10 hex Set Attribute Single
Attribute Access Name Type Description
1 (1 hex) Get Revision UINT Revision of this object
2 (2 hex) Get Max Instance UINT Maximum instances of this object (8)
3 (3 hex) Get
Number of
Instances
UINT Number of object instances
Attribute Access Name Type Description