User`s guide

Series D8 User’s Guide Chapter 2: Installation
Doc. 0600-3120-2000 Watlow Anafaze 13
WARNING! To reduce the risk of fire or electric shock, in-
stall the D8 in a controlled environment, rela-
tively free of contaminants.
Recommended Tools
Use any of the following tools to cut a hole of the appropriate
size in the panel.
• Jigsaw and metal file, for stainless steel and heavyweight
panel doors.
• Greenlee 1/8-DIN rectangular punch (Greenlee part
number 600-68), for most panel materials and thickness-
es.
• Nibbler and metal file, for aluminum and lightweight
panel doors.
You will also need these tools:
• Phillips head screwdriver
• 1/8-inch (3 mm) flathead screwdriver for wiring
• Multimeter
Mounting the Controller
Mount the controller before you mount the other components,
such as the power supply or TB50, or do any wiring. The con-
troller’s placement affects placement and wiring consider-
ations for the other components of your system.
Ensure that there is enough clearance for mounting brackets,
terminal blocks, and cable and wire connections. The control-
ler extends 191 mm (7.5 inches) behind the panel face and the
collar and brackets extend 7 mm (9/32 inches) on the sides and
12 mm (15/32 inches) above and below it. Allow an additional