User`s guide

Chapter 6: Menu and Parameter Reference Series D8 User’s Guide
156 Watlow Anafaze Doc. 0600-3120-2000
Heat/Cool Output Action for Watchdog Inactivity Fault
Action on heat and cool outputs when a DeviceNet Watchdog
Inactivity Timeout is detected.
Values: See Table 6.19 on page 156
Default: 0
DeviceNet Object: Output (65 hex)
Table 6.19 DeviceNet Value for Watchdog
Inactivity Fault
DeviceNet Value Description
0
If not in Manual Mode will then put in Manual Mode, with
output set to value in Sensor Fail Heat and Cool Output.
1 Do Nothing (continue operating output).