User`s guide

Chapter 6: Menu and Parameter Reference Series D8 User’s Guide
146 Watlow Anafaze Doc. 0600-3120-2000
Low Deviation Output
Choose a digital output to activate when the low deviation
alarm occurs. You cannot choose an output that is in use for
closed-loop control or for the Serial DAC clock.
Values: none (0) or output 1 to 18 (1 to 18). Values in paren-
theses are for communications.
Default: none (0)
DeviceNet Object: Alarm (67 hex)
Alarm Low Set Point
Enter the set point at which the low alarm activates. The low
alarm activates if the process variable drops below this value.
For more information, see Process Alarms on page 95.
Values: For a thermocouple or RTD input, any value within
the input range (see Table 6.7 on page 131). For a process or
pulse input, any value between the Input range low and Input
range high parameters.
Default: 0
Decimal Placement for DeviceNet: See Decimal Placement
for Numeric Values on page 59.
DeviceNet Object: Alarm (67 hex)
Alarm Low Function
Choose whether the alarm functions as an alarm or as a boost
output, or disable the alarm.
Values: See Table 6.14 .
Default: off
DeviceNet Object: See Alarm Acknowledge on page 153 and
Alarm Function on page 154.
Alarm Low Output
Choose a digital output to activate when the low alarm occurs.
You cannot choose an output that is in use for closed-loop
control or for the Serial DAC clock.
Values: none (0) or output 1 to 18 (1 to 18). Values in paren-
theses are for communications.
Default: none (0)
DeviceNet Object: Alarm (67 hex)
l01 LoDeviationr
outputbnone
l01 Alarm low r
SP b 0°C
l01 Alarm low r
func boff
l01 Alarm low r
outputbnone