User`s manual

Watlow EZ-ZONE™ Communications • 46 • Chapter 4 DeviceNet
Registering an EZ-ZONE
TM
PM Without a Watlow EDS File
1. With RSNetWorx open and running as shown in figure 4.3 click on "Tools", then "EDS Wizard", then
"Create an EDS File".
2. Click the next button
3. Figure 4.8 shows the next screen that appears. Enter the information for each field as shown below:
- Vendor ID = 153
- Product Type = 12
- Product Code = 301
- Major Revision = 1
- Minor Revision = 1
- Vendor Name = Watlow Electric Inc.
- Product Name = Watlow EZ-ZONE™
- Catalog = A007-2841
Once complete click on the next button.
4. As shown above click on the Polled check box and 84 input bytes and 80 output bytes. Click the next
button when done. The next screen that appears will identify the device graphically with a default
icon. Click the next button and then the finish button to complete the registration process.
Figure 4.9
Figure 4.8