User`s manual

Watlow EZ-ZONE™ Communications • 44 • Chapter 4 DeviceNet
Figure 4.4
Figure 4.5
3. The graphic below (figure 4.5) shows that the file found passes the evaluation executed through RS
NetWorx. Click the next button to proceed.
As can be seen at the bottom of figure 4.4 if there is an icon file with the same name as the EDS file
there will be an automatic association of the icon with this device. We see in figure 4.6 that this association
did indeed occur. If the icon didn't exist than RSNetWorx will use a default icon to graphically display the de-
vice when browsing the network.
1. With RSNetWorx open and running as shown in figure 4.3 click on "Tools", then "EDS Wizard", then
"Register an EDS File".
2. Click the browse button in figure 4.4 to point the software to the Watlow provided EDS file then click
the next button.
Registering an EZ-ZONE™ PM Using Watlow Provided EDS File