User`s guide

MLS User’s Guide Contents
iii
Job Digital Input Polarity.............................................. 64
Output Override Digital Input....................................... 64
Output Override Input Polarity..................................... 64
Startup Alarm Delay ..................................................... 65
Keyboard Lock Status................................................... 65
Power-Up Output Status............................................... 65
Controller Address........................................................ 66
Communications Error Checking ................................. 66
Communications Baud Rate ......................................... 67
Allen Bradley Protocol ................................................. 67
AC Line Frequency....................................................... 67
Digital Output Polarity.................................................. 68
AIM Communications Failure Output.......................... 68
EPROM Information..................................................... 68
Setup Loop Input .......................................................... 69
Input Type..................................................................... 70
Pulse Sample Time ....................................................... 71
Loop Name ................................................................... 71
Input Units ....................................................................71
Input Reading Offset..................................................... 72
Linear Scaling Menus ................................................... 72
Display Format ............................................................. 74
High Process Value....................................................... 74
High Reading ................................................................ 75
Low Process Value ....................................................... 75
Low Reading................................................................. 75
Input Filter ....................................................................76
Setup Loop Control Parameters.......................................... 77
Heat/Cool Control PB................................................... 78
Heat/Cool Control TI.................................................... 78
Heat/Cool Control TD .................................................. 78
Heat/Cool Output Filter ................................................ 79
Heat/Cool Spread.......................................................... 79
Setup Loop Outputs ............................................................ 80
Enable/Disable Heat and Cool Outputs ........................ 82
Heat or Cool Output Type ............................................ 82
Heat/Cool Cycle Time .................................................. 83
SDAC Menus...................................................................... 83
SDAC Mode ................................................................. 83
SDAC High Value ........................................................ 84
SDAC Low Value......................................................... 84
Heat/Cool Output Action.............................................. 84
Heat/Cool Output Limit................................................ 85
Heat/Cool Output Limit Time....................................... 85