User`s guide

Installation
MLS User’s Guide 21
Mounting Steps
1. Choose an appropriate place to install the MLS-AIM.
2. Place the MLS-AIM where you will mount it and use a pencil to trace
around the plastic standoffs on the AIM. (If you wish, you can use the
AIM mounting template in the Quick Start foldout to position the
holes.)
3. Drill four #6 or #8 holes in the chosen location. (#8 holes provide
more clearance.)
4. Place the MLS-AIM where you will mount it. Insert the #6 screws in
the plastic standoffs and tighten them. You may use self-tapping
screws instead, but be sure to remove any loose metal filings after
you are finished mounting the MLS-AIM. Use 3/4" screws with
internal star lock washers to ensure a good Frame Ground connac-
tion.
Scaling Resisters AIM Communications Port (Tel. 1)
Mounting Holes