User manual

Jam at Book Stacker outfeed
The error message JAM AT STACKER OUTFEED is displayed. This means a book or
some paper trimmings are covering the sensor at the Book Stacker outfeed. If the Book
Stacker outfeed is visible:
1.
Remove the book, if present.
2.
Check for paper trimmings and remove them, if present.
3.
Press the reset button on the Book Stacker.
If the pusher is in the forward position so that the Book Stacker outfeed is not visible:
1.
Use your hand to move the pusher to the left, against the spring pressure.
2.
Remove the book, if present.
3.
Check for paper trimmings and remove them, if present.
4.
Press the reset button on the Book Stacker.
Chapter 5 - Error Conditions, Problems and Solutions 99
Clear Paper Jams