User manual

SolutionCauseProblem
The trim blade is in the
wrong position. Touch
START to reset the po-
sition.
Follow the instructions on
the screen.
TRIM BLADE NOT
PARKED
Use the mains ON/OFF
switch. Turn the machine
OFF, then turn the ma-
chine ON. If the problem
continues, then call your
service engineer.
TRIM - No comms
The user has touched the
STOP button while the
machine is in operation.
Touch START to
restart the machine.
USER STOP
Chapter 5 - Error Conditions, Problems and Solutions 87
Error Messages