User manual

SolutionCauseProblem
Press the reset button on
the stacker. If the message
does not clear, use the
stacker mains ON/OFF
switch. Turn the stacker
OFF, then turn the stacker
ON. If the problem contin-
ues, then call your service
engineer.
SYSTEM ERROR 39.xx
See ‘Open the Gathering
Area Cover’ on page 43
The printer has delivered
more than 55 sheets into
the gathering area. Re-
move the incorrect set.
Correct the printer setting.
Touch STOP to clear
the message from the
screen.
TOO MANY PAGES
There is a fault with the
START and STOP touch
pads. If the problem con-
tinues, then call your ser-
vice engineer.
TOUCH PAD ERROR
There may be some paper
in the machine. Touch
START to clear the
machine before you start
a new job.
Touch START to clear
machine
The trim axis (size adjust-
ment) is moving. This
message clears when the
adjustment is complete.
If the message does not
clear, touch AD-
VANCED > RE REF.
Trim axis moving
The trim bin is not fitted
or is not contacting the
safety switch. Fit the trim
bin.
TRIM BIN OPEN
Chapter 5 - Error Conditions, Problems and Solutions86
Error Messages