User manual

SolutionCauseProblem
The stitch axis is moving.
This message clears when
the adjustment is com-
plete.
If the message does not
clear, touch AD-
VANCED > RE REF.
Stitch axis moving
The stitch length cannot
adjust at the moment. The
stitch leg length will adjust
after the next book.
Stitch length will change
soon
Use the mains ON/OFF
switch. Turn the machine
OFF, then turn the ma-
chine ON. If the problem
continues, then call your
service engineer.
STITCH - No comms
The stitch position is ad-
justing. This message
clears when the adjust-
ment is complete.
If the message does not
clear, touch AD-
VANCED > RE REF.
Stitch position adjusting
Press STOP . Open the
folder cover, remove the
paper, close the folder
cover.
STITCH TIMEOUT
Touch STOP to clear the
message from the screen.
If the message does not
clear, use the mains
ON/OFF switch. Turn
the machine OFF, then
turn the machine ON. If
the problem continues,
then call your service engi-
neer.
SYSTEM ERROR
00.20
40.21
40.22
Chapter 5 - Error Conditions, Problems and Solutions 85
Error Messages