User manual

SolutionCauseProblem
See ‘Jam in the Folder or
Former Area’ on page 91
Open the folder cover, re-
move the paper, close the
folder cover.
FORM ROLLER ER-
ROR
The form roller is in the
wrong position. Touch
START to reset the po-
sition. Follow the instruc-
tions on the screen.
FORM ROLLER NOT
PARKED
See ‘Jam in the Folder or
Former Area’ on page 91
There is an error at the
former. Open the folder
cover and remove the
book. If necessary, open
the main deck to remove
the book.
FORM CLAMP ERROR
Close the gathering area
cover if you need to oper-
ate the machine online.
GATHERING AREA
COVER OPEN
Check for a paper jam and
clear if necessary.
Touch STOP to clear
the message from the
screen. If the problem
continues, contact your
service engineer.
INVERTER ERROR
See ‘Clear Paper Jams’ on
page 88
There is a paper jam at the
infeed to the connecting
bridge. Clear the jam and
continue.
JAM AT BRIDGE IN-
FEED
See ‘Jam in the Trim Area’
on page 96.
Open the folder cover, re-
move the paper, close the
folder cover.
JAM AT FORM
ROLLER
See ‘Jam at Book Stacker
infeed’ on page 97
There is a jam in the
stacker infeed. Remove the
books from the stacker in-
feed. Press the reset button
on the stacker.
JAM AT STACKER IN-
FEED
Chapter 5 - Error Conditions, Problems and Solutions80
Error Messages