User manual

SolutionCauseProblem
Use the mains ON/OFF
switch. Turn the machine
OFF, then turn the ma-
chine ON. If the problem
continues, then call your
service engineer.
ENDLAY - No comms
There is an error at the
trimmer.
Check the trimmer for a
paper or book jam.
Touch STOP to clear
the message from the
screen.
ERROR IN TRIM AREA
Use the mains ON/OFF
switch. Turn the machine
OFF, then turn the ma-
chine ON. If the problem
continues, then call your
service engineer.
ERROR - No comms
See ‘Clear Paper Jams’ on
page 88
There is an error at the
connecting bridge. Open
the connecting bridge
cover and check for a pa-
per jam.
Touch STOP to clear
the message from the
screen.
FLOW ERROR -
BRIDGE
See ‘Jam in the Folder or
Former Area’ on page 91
There is an error at the
former. Open the folder
cover and remove the
book. If necessary, open
the main deck to remove
the book.
FLOW ERROR - FOR-
MER
See ‘Jam in the Gathering
Area’ on page 89
There is a paper jam in the
gathering area. Open the
connecting bridge cover,
lift the gathering area and
remove the paper jam.
FLOW ERROR -
GATHER AREA
Chapter 5 - Error Conditions, Problems and Solutions78
Error Messages