User manual

SolutionCauseProblem
Remember to check the
paper size.
To make an accurate book
you must enter accurate
paper dimen-sions into the
touch screen.
Measure the size of the
printed paper. The paper
dimension changes when
the paper is printed.
CHECK PAPER SIZE
The trim bin is either
open or full. Check the
trim bin. Empty the trim
bin if necessary.
CHECK THE TRIM
BIN
A safety cover is open. The
machine will not operate
until the cover is closed.
COVER OPEN
Use the mains ON/OFF
switch. Turn the machine
OFF, then turn the ma-
chine ON. If the problem
continues, then call your
service engineer.
DFA INTERFACE - No
comms
There is a paper jam.
Check the machine and
correct the error.
Touch STOP to clear
the message from the
screen.
DRIVE MOTOR STALL
The endlay axis (size ad-
justment) is moving. This
message clears when the
adjustment is complete.
If the message does not
clear, touch ADVANCED
> RE REF.
Endlay axis moving
Chapter 5 - Error Conditions, Problems and Solutions 77
Error Messages