User manual

SolutionCauseProblem
Books are being delivered
to the stacker too fast.
This error can happen
when you insert books in-
to the stacker by hand.
Press the reset button on
the stacker. If the problem
continues, then call your
service engineer.
BOOK DELIVERY TOO
FAST
The bridge axis is moving.
This message clears when
the adjustment is com-
plete.
If the message does not
clear, touch ADVANCED
> RE REF.
Bridge axis moving
See ‘Clear Paper Jams’ on
page 88
The bridge infeed cover is
open.
The machine will not op-
erate until the cover is
closed.
BRIDGE INFEED
COVER OPEN
See ‘Clear Paper Jams’ on
page 88
Check for a paper jam in
the connecting bridge.
■
Touch STOP to
stop the Booklet mak-
er.
■
Clear the paper jam.
■
Touch STOP to
clear the message from
the screen.
■
Continue the print job.
BRIDGE MOTOR
STALL
Use the mains ON/OFF
switch.
Turn the machine OFF,
then turn the machine
ON.
If the problem continues,
then call your service engi-
neer.
BRIDGE - No comms
Chapter 5 - Error Conditions, Problems and Solutions76
Error Messages