User manual

Installation
Your Booklet maker must be installed by a service engineer. Special knowledge is needed
to install the machine.
Attention:
Only connect the machine to a mains power supply of the correct voltage with a good
earth connection. The correct machine voltage is shown on the label at the mains power
supply input on the rear of the machine. If the machine is connected to the wrong supply,
the warranty is cancelled.
How to Get Help
If you have any questions or problems, refer to the problem solving section in this manual
(see chapter “Error Conditions, Problems and Solutions” ). Contact your Booklet maker
supplier for further help
Chapter 1 - Introduction to the Booklet maker 7
Introduction