User manual

NoYes

Select STITCHES 1 - 6 (see ‘The BASIC

Window’ on page 27).

Check the stitch-wire spool. Is there stitch-wire present?

NoYes

Load a new stitch-wire spool (see ‘Install

New Stitch-wire’ on page 133).

Open the PSQ main deck (see ‘Lift the Booklet maker Main Deck’ on page 44).

Pull approximately 100 mm -150 mm of stitch-wire from the stitch wire spool.

Does the wire move freely?

NoYes

Open the stitch-wire cabinet. Discard any

tangled wire and reload the stitch-wire

spool (see ‘Install New Stitch-wire’ on page

133).

Check the stitch head for stitch-wire jams.

Is the stitch head clear of stitch-wire jams?

NoYes

Clear the stitch-wire jam (see ‘Clear a

Stitch-wire Jam’ on page 100).

Lubricate the stitch head (see ‘Lubricate the Stitch Head’ on page 128).

Does the problem continue?

NoYes

Further action is not needed.¦

Call your service engineer

Stitching problems - the book is badly stitched

A correctly formed stitch:

■

has equal leg length

■

has straight legs

Chapter 5 - Error Conditions, Problems and Solutions66

Book Quality