User manual

This chapter describes how to correct problems that can occur on your Booklet maker. If a problem
continues, contact your service engineer.
Clear a Printer Error
Introduction
If a paper jam or other error occurs in the printer, the printer and the Booklet maker
stop.
Procedure
1.
Clear the printer error.
2.
Follow the instructions on the printer. If the printer tells you to remove paper from the
Booklet maker, touch START to start the machine.
3.
Then touch ADVANCED > PURGE SET > PURGE SET.
4.
The partial book is delivered to the stacker.
5.
Discard the book.
6.
Check the Océ BLM500/550/550 PRO screen. If an error message is displayed, take the
corresponding action (see ‘Error Messages’ on page 75).
Chapter 5 - Error Conditions, Problems and Solutions56
Clear a Printer Error