User manual

Unload the Book Stacker
Introduction
A
B
[27] The book divider
#
Guide railA
Book dividerB
Procedure
1.
If required, insert the book divider so that the stack does not slip while you unload the
books.
2.
Remove the books.
3.
Push the book support completely to the left (see ‘Illustration’ on page 51).
4.
Remove the book divider until it is needed. Store the book divider on the right-hand end
of the guide rail of the stacker.
Chapter 4 - Standard Tasks52
Unload the Book Stacker