User manual

Collection tableB
Orange plastic hand-screwC
Catch trayD
Procedure
1.
#
InformationActionStep
For books that are 1.5mm thick or
less, use position 1.
For books that are more than
1.5mm thick, use position 2.
‘Introduction’ on page 49
Set the catch tray angle according
to the thickness of the book.
1
Read the setting through the win-
dow.
‘Introduction’ on page 49
Set the collection table position ac-
cording to the size of the book.
2
These settings are recommendations. The settings can change with the size, thickness and
material of book. Make further adjustment if necessary.
Chapter 4 - Standard Tasks50
Adjust the Stacker