User manual

The ADVANCED Window
Introduction
The ADVANCED window gives you access to special machine functions.
Button overview#
InformationButton
If the machine calibration appears incorrect or if an 'axis
moving' error message remains on the screen, touch RE-
REF to re-reference the adjustment axes. The adjustment
axes return to the current settings. At intervals, the machine
will re-reference the axes during the set-up procedure.
RE-REF
Touch STITCHER UP before you lubricate the stitch
head. This action moves the stitch head to the correct posi-
tion for lubrication.
STITCHER UP
If the print job has been cancelled, a set or part of a set can
remain in the gathering area. Touch START , then touch
PURGE SET to clear the set from the machine. The book
is not stitched or trimmed
According to the type of error that occurred, there can be
a pause of 7 seconds before the PURGE SET button will
operate.
For safety reasons, this function is disabled when the gath-
ering area cover is open.
PURGE SET
If there is a set in the gathering area, you can make the set
into a book. Touch START then touch MAKE BOOK
to clear the set from the machine. The book is not stitched
or trimmed.
According to the type of error that occurred, there can be
a pause of 7 seconds before the MAKE BOOK button will
operate.
For safety reasons, this function is disabled when the gath-
ering area cover is open.
- MAKE BOOK
Chapter 3 - The User Interface 31
The ADVANCED Window