User manual

The LOAD & SAVE Window
Introduction
The LOAD & SAVE window lets you save and reload job settings. Each job is given
a name. The jobs are displayed in a list on the screen. Touch the job name or use the Up
arrow or Down arrow to make the selection.
Button overview
The LOAD & SAVE Window Buttons#
InformationButton
Touch SAVE to save the current settings. An on-screen
keyboard is displayed. Enter the job name. Touch OK or
CLOSE. The new job appears in the list of saved jobs. You
can reload a saved job to decrease set-up time in the future.
SAVE
If you change the settings of a saved job, touch REPLACE
to save the new settings.
- REPLACE
Touch CANCEL if you do not need to save a job that you
have changed.
- CANCEL
If you change the settings of a saved job, touch SAVE NEW
to save the new settings as a new job. An on-screen keyboard
is displayed. Enter the new job name. Touch OK or
CLOSE. The original job is not changed. If the job name
is not changed before OK or CLOSE is touched, the job
will be saved with the current name followed by an asterisk
*.
- SAVE NEW
JOB DETAILS shows the settings for each saved job. Select
the job that you need to view from the job list. Touch JOB
DETAILS to see a summary of the job settings.
JOB DETAILS
Touch the job name or use the Up arrow or the Down ar-
row to make the selection. Touch the LOAD button
LOAD
The padlock symbol shows when a saved job is locked or
unlocked. There is a small padlock symbol next to each
locked job. To lock or unlock a job.
1. select the job from the job list
2. touch the large key symbol.
A padlock symbol displayed in light grey shows that a job
has been locked by a supervisor to prevent changes to the
settings
PADLOCK SYMBOL
Chapter 3 - The User Interface 29
The LOAD & SAVE Window