User manual

The Touch Screen
Introduction
A
B
C
[6] The User Interface
#
START ButtonA
STOP ButtonB
Touch ScreenC
The user interface includes a colour touch screen and START/STOP buttons.
Operate the touch screen with a fingertip. You can touch the screen with a blunt item,
for example a palm-top 'wand' or the blunt end of a pen. Do not use too much force. A
light touch is all that is needed.
Power save
The touch screen has a power-save function. After several minutes without use, the
brightness of the touch screen decreases. After several hours, the touch screen turns off.
Touch the screen to restore the normal brightness. The touch screen takes two or three
minutes to reach full brightness.
If you hear a 'beep' when you operate the touch screen, the selected function is not
available. Some functions are not available when the machine is in operation.
Some functions and buttons are only available at certain access levels. See "ACCESS
LEVEL" ‘The MENU Window’ on page 33.
Attention:
Do not operate the touch screen with a sharp object or with too much force. These actions
can damage the touch screen.
Chapter 3 - The User Interface22
The Touch Screen