User manual

Procedure for a New Job
#
InformationActionStep
Touch BASIC 1
Touch PAPER SIZE. Enter the dimensions of the pa-
per.
The job setting is easier if you first select a preset paper
size, then adjust the settings as necessary
Touch PAPER SIZE > PRESETS > A3 or A4. (USA:
11x17, 8.5x11 or 8.5x14)
Enter the paper size2
Touch PAGE DIRECTION > LANDSCAPE or
PORTRAIT.
If the PAGE DIRECTION option is not available, the
PAGE DIRECTION cannot be changed.
Enter the page di-
rection
3
For A4 paper size, the normal setting for ROTATE is
ON. Rotation lets the printer operate at optimum
speed.
Touch ROTATE to turn the sheet rotation ON or
OFF. Always select the page direction before you
change the rotate setting.
Enter the page rota-
tion setting
4
Touch SET THICKNESS. Enter the measured value.Enter the set thick-
ness.
5
Touch STITCHES and enter the number of stitches.
If needed, the stitch pitch can be changed. See
"STITCH PITCH",‘Button overview’ on page 27
Enter the number
of stitches.
6
The spine form setting is automatic, according to the
SET THICKNESS setting. If needed, the setting can
be changed. See "FORM" in ‘Button overview’ on page
27
Enter the spine
form setting
7
The trim setting is automatic, according to the PAGE
SIZE and SET THICKNESS settings. To change the
setting, touch TRIM. See “TRIM” in ‘Button overview’
on page 29
Enter the trim set-
ting.
8
Touch CLOSE9
If the same job settings are used frequently, then save
the job settings to memory.
See ‘Save a job’ on page 36.
If needed, save the
job settings to
memory.
Chapter 2 - How to run the Booklet maker 17
Enter the Job Settings