User manual

This chapter gives information on how to run a job on the Booklet maker. For information on how
to operate the printer, refer to the printer documentation.
Information about the user interface is included in chapter “The User Interface”.
Information about standard procedures, for example opening covers to clear a paper jam, is included
in chapter “Standard Tasks”.
Before You Begin
Paper and Book Quality Instructions
■
The size of paper and the thickness of the set must be measured. These measurements
are entered into the touch screen before you begin a print job.
■
Measure the size of the printed paper. The paper dimension changes when the paper
is printed.
■
Measure the set thickness as accurately as possible. Use the measuring tool supplied
with the machine.
■
To get the best accuracy, use millimetres to measure the set (see ‘Before You Begin’ on
page 16).
■
Enter accurate dimensions into the touch screen.
■
If the book is made from several different types of paper, make sure the different paper
types are all the same size.
See ‘Book Quality’ on page 60 for further information.
Chapter 2 - How to run the Booklet maker14
Before You Begin