User manual

Illustration
A
[93] Trim Stop
#
Trim StopA
Clear paper from the trim stop
#
InformationActionStep
Remove the trim bin.1
See ‘Illustration’ on page 138.
Loosen the 2 orange plastic hand
screws to release the locking
plates.
The locking plates can rotate to
release the trim stop guard.
Pull the trim stop guard towards
you.
Open the trim stop guard.2
See ‘Illustration’ on page 139Check the trim stop and remove
any pieces of trimmed paper.
3
Push the trim stop guard into
position.
Hold the locking plates in posi-
tion and tighten the orange hand
screws.
Close the trim stop guard.4
Attach the trim bin.5
Chapter 6 - Maintenance 139
Clear paper from the trim stop