User manual

InformationActionStep
Push stitch-wire in direction of arrow
Push the stitch-wire into the
stitchwire guide block.
4
A
Detail A:Make sure the stitch-wire runs
between the wire feed rollers and into
the middle wire tube.
Push the stitch-wire as far as
possible.
5
Close the Booklet maker
#
InformationActionStep
Close the stitch wire cabinet.1
‘Lower the Clincher Frame’ on page 42.Lower the Booklet maker main
deck.
2
Lower the clincher frame.3
Close the folder cover.4
Close the connecting bridge
cover.
5
Feed the Stitch-wire
#
InformationActionStep
Touch START .1
Touch BASIC > STITCHES.Set the number of stitches to
6
3
The stitch-wire loads automatically
during the stitch head cycle.
Hand-feed or print an A4 or
larger size test job..
4
Chapter 6 - Maintenance136
Install New Stitch-wire