User manual

InformationActionStep
Remove enough stitch-wire to leave the
end of the stitch-wire clean and straight.
Use wire-cutters to remove the
damaged end of the stitch-
wire.
6
Feed the stitch-wire through
the stitch-wire guide.
7
‘Install the Stitch-wire into the Stitch
Head’ on page 135
Install the stitch-wire.8
Install the Stitch-wire into the Stitch Head
#
InformationActionStep
Pull the stitch-wire from the
end of the stitch-wire guide.
1
Make sure the stitch-wire runs
behind the gas-strut.
2
A
Detail A: Felt Wire-Cleaning Pads
Feed the end of the stitch-wire
between the felt wire-cleaning
pads.
3
Chapter 6 - Maintenance 135
Install New Stitch-wire