User manual

Remove the Stitch-wire from the Stitch Head
#
InformationActionStep
A
Detail A: Cut here
Cut the stitch-wire to the right
of the stitch-wire guide block.
1
Pull the stitch-wire from the
stitch-wire guide block.
2
‘Fit a New Stitch-wire Spool’ on page 134Fit a new stitch-wire spool.3
Fit a New Stitch-wire Spool
#
InformationActionStep
Open the stitch-wire cabinet1
Remove the stitch-wire cap and
finished stitch-wire spool.
2
Fit a new stitch-wire spool.3
Fit the stitch-wire cap4
Loosen the end of the stitch-
wire from the edge of the
stitch-wire spool.
5
Chapter 6 - Maintenance134
Install New Stitch-wire