User manual

Required tool
■
Klüber Isoflex NBU15 Grease, 50g
■
Air duster
Attention:
- Only use the grease shown in this manual. Correct lubrication extends the performance
and service life of the stitch head. Other types of grease do not protect the stitch head
- Only apply the grease as shown. If you apply additional grease, the paper gets marked.
Before You Begin
#
InformationActionStep
See Trim the nozzle of the tube of
grease.
Trim the first part from the
nozzle.
1
Remove the cap from the tube
of grease.
2
Fit the nozzle to the tube of
grease.
3
The folder cover must be closed.
This action moves the stitch
head to the correct position for
lubrication.
On the user interface, touch
ADVANCED > STITCHER
UP > STITCHER UP
4
See ‘Lift the Booklet maker Main
Deck’ on page 44
Lift the Booklet maker main
deck
5
Apply the Grease to the Driver Bar
#
InformationActionStep
Use the supplied air duster to
remove dust from the stitch
head.
1
Chapter 6 - Maintenance130
Lubricate the Stitch Head