User manual

InformationActionStep
1. Hold the shaft and push to the
right, against spring pressure to disen-
gage the shaft from the drive pin.
1
2
3
2. Rotate the shaft by half a turn.
3. Align the shaft with the drive pin
and release.
Rotate the conveyor shaft by half
a turn.
4
Wear protective gloves when you use
the alcohol wipe.
Clean the four visible trimmings-
removal fingers with an alcohol
wipe.
5
Fit the trim bin.6
Close the Booklet maker.7
Chapter 6 - Maintenance 125
Clean the Trimmings-removal Fingers