User manual

Clean the Polyurethane Strips in the Form Clamp
Introduction
Clean the polyurethane strips in the form clamp:
■
Every month, as part of the operator maintenance plan.
■
If there are dirty marks near the spine on the front and back cover of the book. Ink
and toner can collect on these parts, especially when you make thin books.
[67] Dirty marks beside the spine
Required tool
■
Alcohol wipe or
■
A lint free cloth and alcohol (isopropanol)
Attention:
Only use alcohol to clean this part of the machine. Other chemicals can damage the ma-
chine.
Caution:
Wear protective gloves when you use the alcohol wipe.
Note:
If you push the eject rollers, the rollers can move together against your hand. This
movement can alarm you, but is not dangerous.
Chapter 6 - Maintenance120
Clean the Polyurethane Strips in the Form Clamp