User manual

The mains input panel of the Book Stacker
Illustration
A
B
C
D
E
[5] The mains input panel of the Book Stacker
Component - function table
The mains input panel of the Book Stacker#
FunctionComponent
The rating label displays the type of machine, serial
number, power use and fuse information.
Rating and serial labelA
The voltage advisory label shows that the input
voltage is 230 V AC. The 230 V power is supplied
by the Océ BLM500/550/550 PRO.
Voltage advisory labelB
The power input connector is used to connect the
power supply from the Océ BLM500/550/550
PRO to the Book Stacker.
Power input connectorC
The mains power ON/OFF switch turns ON the
Book Stacker or turns OFF the Book Stacker.
Mains power ON/OFF
switch
D
The fuses make sure the operator and the machine
are protected if there is an electrical problem or
short circuit.
FusesE
Chapter 1 - Introduction to the Booklet maker12
The mains input panel of the Book Stacker