User manual

Clean the Former Roller
Introduction
Clean the former roller:
■
Every month, as part of the operator maintenance plan.
■
If the spines of the books are dirty. Ink and toner can collect on the former roller.
[66] Dirty marks on the spine
Required tool
■
Clean, plain paper that is not printed. A3 size (USA: 11 x 17”) is recommended. 4mm
thickness is needed for each cycle. More than one cycle can be needed
Procedure
#
InformationActionStep
■
Set the touch screen to the cor-
rect PAPER SIZE
■
Set the SET THICKNESS to
4.0
■
Set the number of STITCHES
to 0.
■
Set the number of FORMS to 4.
Enter the correct settings on the
touch screen.
1
Touch START 2
Open the connecting bridge
cover.
3
Lift the gathering area cover.4
Put 4mm of clean paper in the
gathering area.
5
Press the two orange buttons
and hold for 9 seconds, or until
you hear the folder operate.
6
Chapter 6 - Maintenance118
Clean the Former Roller