User manual

Procedure

Step

See ‘Open and Close the Folder Cover’

on page 39

Open the folder cover.1

‘Illustration’ on page 109 shows the

correct position for the shuttle assem-

bly. The screw ‘A’ must align with

the white gear ‘B’.

If the shuttle assembly does not move

to the correct position, push the pick-

up fingers away from each other by

2-3mm and try again. Repeat if nec-

essary.

See ‘Illustration’ on page 109.

Push the shuttle-assembly to the

end.

If the message does not clear, check

that the shuttle assembly is in the

correct position. Repeat Step 2 if

necessary.

Wait until the error message

SHUTTLE NOT PARKED is

cleared from the screen.

Close the folder cover.4

Result

The error message ‘MANUALLY PARK SHUTTLE’ is cleared from the screen. The

shuttle axis re-references and the message Shuttle axis moving is displayed.

When the message list is clear, you can continue operation

Chapter 5 - Error Conditions, Problems and Solutions110

Manually park the Shuttle