User manual

The Rear Panel of the Booklet maker
Illustration
B
C
E
D
F
A
[4] The Rear Panel of the Booklet maker
Component - function table
The Rear Panel of the Booklet maker#
FunctionComponent
The rating label displays the type of machine, serial
number, power use and fuse information.
Rating and serial la-
bel
A
The mains power ON/OFF switch turns ON or turns
OFF the Booklet maker. When you turn OFF the
Booklet maker, the current settings are stored.
Mains power
ON/OFF switch
B
The voltage advisory label tells the installer to refer
to the installation instructions before the Booklet
maker is connected to mains power. The Booklet
maker can be adjusted for one of several different
input voltages.
Voltage advisory la-
bel
C
The fuses make sure the operator and the machine
are protected if there is an electrical problem or short
circuit.
FusesD
The voltage label is fitted to the Booklet maker dur-
ing the installation procedure. The voltage label dis-
plays the selected voltage.
Voltage labelE
The mains power input connector is used to connect
the Booklet maker to mains electrical power.
Mains power input
connector
F
Chapter 1 - Introduction to the Booklet maker 11
The Rear Panel of the Booklet maker