User manual

Clear a Stitch Head Jam

Introduction

The error message JAM IN STITCH HEAD is displayed.

This may be caused by

■

the SET THICKNESS setting is incorrect

■

the stitch head is jammed by broken wire

■

the stitch head needs lubrication

Do Procedure 1. If the error message continues, do Procedure 2.

Procedure 1

InformationActionStep

See ‘Open and Close the Folder Cover’

on page 39

Open the folder cover.1

See ‘Lift and Lower the Clincher

Frame’ on page 41.

Lift the clincher frame.2

Remove the jammed paper.3

A: Press to manually operate the

clincher.

Check for broken or damaged

stitches in the clincher area.

Manually operate the clincher

to clear any stitches that are

jammed.

See ‘Lift and Lower the Clincher

Frame’ on page 41

Lower the clincher frame.5

Close the folder cover.6

Press the START button .

Follow the on-screen instruc-

tions.

Chapter 5 - Error Conditions, Problems and Solutions102

Clear a Stitch Head Jam