User manual

Clear a Stitch Head Jam

Procedure 1

[41]

Procedure 2

[42]

Step Action Information

1 Stop the Booklet maker. Touch the STOP button

2 Open the folder cover. Open and Close the Folder Cover

on page 37

3 Lift the clincher frame. Lift and Lower the Clincher Frame

on page 38.

4 Remove the jammed paper.

5 Check for broken or damaged

stitches in the clincher area.

Manually operate the clincher

to clear any stitches that are

jammed.

[41]

Press to manually operate the

clincher.

6 Lower the clincher frame. Lift and Lower the Clincher Frame

on page 38

7 Close the folder cover.

8 If there is paper in the

gathering area, touch START,

then touchADVANCED >

PURGE SET > MAKE

BOOK.

This action clears paper from the

BLM 500 / Bookletmaker 50and

resets the stitch head.

9 Continue the print job.

[42]

[42] Remove the stitch head wire holder

A Stitch head