User manual

75
Stitch Timeout Error
Stitch Timeout Error
Introduction
[36]
Step Action Information
1 Open the folder cover. Open and Close the Folder Cover
on page 37
2 Lift the clincher frame. Lift and Lower the Clincher Frame
on page 38
3 Remove the paper.
4 Lower the clincher frame. Lift and Lower the Clincher Frame
on page 38
5 Close the folder cover.
6 If the error message
SHUTTLE NOT PARKED is
displayed, touch START
This action moves the shuttle to the
correct position.
7 Touch STOP and then
continue the print job.