User manual

74 Chapter 5 Error Conditions, Problems, and Solutions
Clear Paper Jams
Jam in the Trim Area
[35]
Step Action Information
1 Remove the trim bin.
2 Loosen the 2 orange plastic
hand screws to release the
locking plates.
The locking plates can rotate to
release the trim stop guard.
3 Pull the trim stop guard
towards you.
4 Remove the jammed book. Check the trim stop and remove
any pieces of trimmed paper.
5 Push the trim stop guard into
position.
6 Hold the locking plates in
position and tighten the orange
hand screws.
7 Attach the trim bin.
8 Touch START, then touch
ADVANCED > PURGE SET
> PURGE SET.
This action clears any other paper
from the Booklet maker.
9 Continue the print job.