User manual

54 Chapter 5 Error Conditions, Problems, and Solutions
Error Messages
Error Messages
[26]
Problem Cause Solution
AXES MOVING Some of the machine axes
are moving. This message
clears when the
adjustment is complete.
If the message does not
clear, touch ADVANCED
> RE REF
BOOK CYCLE TIME
TOO LONG
The printer has delivered
the sets faster than the
books can be made. To
decrease the book cycle
time, adjust the machine
settings:
■ decrease the number
of FORMS
■ decrease the number
of STITCHES
■ decrease the TAMPER
TIME
■ touch STOP to clear
the message from the
screen
Bridge axis moving The bridge axis is
moving. This message
clears when the
adjustment is complete.
If the message does not
clear, touch ADVANCED
> RE REF.
BRIDGE INFEED
COVER OPEN
The bridge infeed cover is
open.
The machine will not
operate until the cover is
closed.
(see ‘Clear Paper Jams’
on page 68)